AATCC TM169 Weather Resistance of Textiles: Xenon Lamp Exposure

ASTM B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

ASTM C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

ASTM C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

ASTM C1501Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

ASTM C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

ASTM C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

ASTM C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

ASTM C793 Standard Test Method for Effects of Accelerated Weathering on Elastomeric Joint Sealants

ASTM D1148 Standard Test Method for Rubber Deterioration Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

ASTM D1670 Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials

ASTM D2565 Standard Practice for Xenon Arc Exposure of Plastics Intended for Outdoor Applications

ASTM D3451 Standard Guide for Testing Coating Powders and Powder Coatings

ASTM D4101Standard Specification for Polypropylene Injection and Extrusion Materials

ASTM D4355 Standard Test Method for Deterioration of Geotextiles from Exposure to Ultraviolet Light and Water (Xenon-Arc Type Apparatus)

ASTM D4434 Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

ASTM D4459 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

ASTM D4637 Standard Specification for EPDM Sheet Used in Single-Ply Roof Membrane

ASTM D4798 Standard Test Method for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

ASTM D4811 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

ASTM D5019 Standard Specification for Reinforced CSM (Chloro-sulfonated Polyethylene) Sheet Used in Single-Ply Roof Membrane

ASTM D5819 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

ASTM D6083 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing

ASTM D6577 Standard Guide for Testing Industrial Protective Coatings

ASTM D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

ASTM D6695 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

ASTM D6878 Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

ASTM D750 Standard Test Method for Rubber Deterioration Using Artificial Weathering Apparatus

ASTM D7869 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

ASTM F1164 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress

ASTM F1515 Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change

ASTM G7 Standard Practice for Atmospheric Environmental Exposure Testing of Nonmetallic Materials

ASTM G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources

ASTM G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials

ASTM G154 Standard Practice for Operating Fluorescent Ultraviolet (UV) Lamp Apparatus for Exposure of Nonmetallic Materials

ASTM G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials

EN 927-3: Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test

EN 927-6: Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water

EN 513 Unplasticized polyvinylchloride (PVC-U) profiles for the fabrication of windows and doors - Determination of the resistance to artificial weathering

EN1297 Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Method of artificial ageing by long term exposure to the combination of UV radiation, elevated temperature and water

GB/T 14522 Accelerated weathering test method for plastics, coatings and rubber materials used for machinery industrial products

GB/T 16259 Test method for accelerated weathering of building materials

GB/T 16422 Plastics -- Methods of exposure to laboratory light sources -Part 2: Xenon-arc lamps

GB/T 16991 Textiles--Test for color fastness--Color fastness and ageing to artificial light at high temperatures: Xenon-arc

GB/T 1865 Paints and varnishes--Artificial weathering and exposure to artificial radiation -Exposure to filtered xenon- arc radiation

GB/T 29061 Performance films for glass in buildings

GB/T 3511 Rubber, vulcanized- Test method for resistance to artificial weathering (xenon-arc)

GB/T 6151Textiles-Tests for color fastness-General principle of testing

GB/T 8427 Textiles - Tests for color fastness - Color fastness to artificial light: Xenon arc fading lamp test

GB/T 8430 Textiles - Tests for color fastness to artificial weathering - Xenon-arc fading lamp test

IEC 61215 Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval

ISO 105-B02 Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test

ISO 105-B04 Textiles - Tests for colour fastness - Part B04: Colour fastness to weathering: Xenon arc test

ISO 105-B06 Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test

ISO 105-B07 Textiles - Tests for Colour Fastness - Part B07: Colour Fastness to Light of Textiles Wetted with Artificial Perspiration

ISO 105-B10 new standard Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation

ISO 11341 Paints and Varnishes - Artificial Weathering and Exposure to Artificial Radiation - Exposure to Filtered Xenon-Arc Radiation (Withdrawn)

ISO 16474-1 Paints and varnishes - Methods of exposure to laboratory light sources - Part 1: General guidance

ISO 16474-2 Paints and varnishes - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps

ISO 16474-3 Paints and varnishes - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps

ISO 29664 Plastics - Artificial Weathering Including Acidic Deposition

ISO 4892-1 Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance

ISO 4892-2 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc sources

ISO 4892-3 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps

ISO 8565 Metals and alloys — Atmospheric corrosion testing — General requirements

ISO 2810 Paints and varnishes - Natural weathering of coatings - Exposure and assessment

ISO 877-1 Plastics - Methods of exposure to solar radiation - Part 1: General guidance

ISO 877-2 Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass

ISO 877-3 Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation

JIS B 7754 Light-exposure and light-and-water-exposure apparatus (xenon arc lamp type)

MIL-STD 810G Environmental engineering considerations and laboratory tests - Part 2: Laboratory test methods - 505.5: Solar radiation (Sunshine)

RAL GZ 716/1 Kunststoff-Fensterprofilsysteme - Gütesicherung

ASTM-DIN 艾司坦丁仪器 技术支持：400 676 5665 【365*24小时服务热线】

ASTM-DIN 艾司坦丁仪器环境模拟试验设备，满足如下国际国内行业标准：

       GB/T 16422.1 2019、GB/T 16422.2 2014、GB/T 16422.3 2014、GB/T 16422.4 2014、GB/T 1865 2009、GB/T 16585 1996、GB/T 15255 2015、GB/T 15596 2009、GB/T 17875 1999、GB/T 7762 2014、GB/T 13642 2015、GB/T 14274 2003、GB/T 14831 2003、GB/T 9871 2008、GB/T 3511 2018、GB/T 3681 2011、GB/T 17603 2017、GB/T 11039.3-2005、GB/T 11206-2009、GB/T 14522-2008、GB/T 16259-2008、GB/T 18244-2000、GB/T 18424-2001、GB/T 18830-2009、GB/T 18950-2003、GB/T 19394-2003、GB/T 22771-2008、GB/T 31881-2015、GB/T 31973-2015、GB/T 32088-2015、GB/T 3512-2014、GB/T 35804-2018、GB/T 40512-2021、GB/T 5137.3-2002、GB/T 6808-1986、GB/T 12967.4-2014、GB/T 8013.3-2018、GB/T 8426-1998、GB/T 8427-2019、GB/T 8429-1998、GB/T 8430-1998、GB/T 18833-2012、GB/T 9276-1996、GB/T 23987-2009、GB/T 12754-2016、GB/T 13448-2019、GB/T 23983-2009、GB/T 24508-2020、GB/T 8814-2017、GB/T 12527-2008、GB/T 17657-2013、GB/T 24135-2009、GB/T 22411-2008、GJB 150.11A-2009、ISO 4892-1 2016、ISO 4892-2 2006、ISO 4892-3 2006、ISO 4892-3 2004、ISO 11341 2004、ASTM G53 88、ASTM D750、ISO 4582 2007、ASTM D3611、ISO 1431/1 2004、ISO 1431/2、ISO 2440 1997、ISO 6914 2004、ISO 4665 2016、ISO 877 1994、ASTM D5272 92、ISO 105-G03 1993、ASTM D518 1999、ISO 4892-82、ASTM  G53-84、ISO 4892 1993、JIS K7212-1995、ISO 1431.1-1989、ISO 4892-1994、ISO 11758 1995、EN 13758、ISO 8580 1987、IEC 61345 1998、ISO 12040 1997、ISO 188 2011、ISO 1431-3 2000、ISO 3917 2016、ISO 2135-84、ISO 6581 2010、ISO 105-B01 1994、ISO 105-B02 2014、ISO 105-B03 1994、ISO 105-B04 1994、ISO 2810 1974、ISO 11507 2007、ISO 1419-1995、GB/T 16422.1 2006、GB/T 16422.2 2014、GB/T 16422.3 1997、GB/T 16422.4 1996、GB/T 1865-1997、GB/T 15255-1994、GB/T 15596 2009、GB/T 15596 2021、GB/T 14274 1993、GB/T 3511-2008、GB/T 12831 1991、GB/T 3681-2000、GB/T 14519-1993、GB/T 17603 1998、GB/T 11041-1989、GB/T 11206-1989、GB/T 14522-1993、GB/T 16259-1996、GB/T 18830-2002、GB/T 5137.3-2002、GB/T 12967.4-1991、GB/T 8013.3-2007、GB/T 8426-1987、GB/T 8427-2008、GB/T 8429-1987、GB/T 8430-1987、GB/T 18833-2002、GB/T 1767-1979、GB/T 9276-1988、GB/T 12754-2006、GB/T 13448-2006、GB/T 24508-2009、GB/T 8814-2004、GB/T 12527-1990、GB/T 17657-1999、GJB 150.11A-1986、GB/T 10119-2008、GB/T 10123-2001、GB/T 10125-2012、GB/T 10126-2002、GB/T 10127-2002、GB/T 10587-2006、GB/T 10834-2008、GB/T 11377-2005、GB/T 12000-2017、GB/T 12085.4-2010、GB/T 12967.3-2008、GB/T 13452.4-2008、GB/T 1771-2007、GB/T 14092.5-2009、GB/T 14093.4-2009、GB/T 14165-2008、GB/T 14834-2009 、GB/T 16266-2019、GB/T 16267-2008、GB/T 17897-2016、GB/T 18912-2002、GB/T 19291-2003、GB/T 19292.1-2018、GB/T 19292.4-2018、GB/T 19355.1-2016、GB/T 19745-2005、GB/T 20853-2007、GB/T 20854-2007、GB/T 24195-2009、GB/T 2423.17-2008、GB/T 2423.18-2021、GB/T 26323-2010、GB/T 28416-2012、GB/T 31588.1-2015、GB/T 35858-2018、GB/T 4797.6-2013、GB/T 5170.8-2017、GB/T 6461-2002 、GB/T 6465-2008、GB/T 7998-2005、GJB 150.11A-2009、ISO 6509、ISO 8044、ISO 9227、ASTM G48、ISO 4543、ISO 4611-2010、ISO 9227 2006、ISO 4623-1 2000、ISO 7253 1996、ISO 8565 1992、ISO 6505 2005、FED-STD-101、FED-STD-101C、IEC 61701 1995、ISO 11845 1995、ISO 9223 2012、ISO 9226 2012、ISO 14713-1 2009、ISO 10062 1991、ISO 16701 2003、ISO 14993 2001、ISO 16151 2005、IEC 60068-2 1981、IEC 60068-2-52 1996、ISO 4623-2 2003、ISO 21207 2004、IEC 60721-2-5 1991、ISO 10289 1999、ISO 4541 178、ASTM G110 1992、GB/T 10125-1997、GB/T 10125-2021、GB/T 10587-1989、GB/T 10834-1989、GB/T 12000-2003、GB/T 12085.4-1989、GB/T 12967.3-1991、GB/T 1771-1991、GB/T 16266-2008、GB/T 16267-1996、GB/T 2423.17-1993、GB/T 2423.18-2012、GB/T 4797.6-1995、GB/T 5170.8-2008、GJB 150.11A-1986、GB/T 10586-2006、GB/T 10589-2008、GB/T 10590-2006、GB/T 10591-2006、GB/T 10592-2008、GB/T 2422-2012、GB/T 2423.1-2008、GB/T 2423.2-2008、GB/T 2423.3-2016、GB/T 2424.6-2021、GB/T 5170.10-2017、GB/T2423.1-2008、GB/T2423.22-2012、GB/T2423.4-2008、GB/T 10263-2006、GB/T 11606-2007、GB/T 18102-2020、GB/T 23828-2009、GJB 150.4A-2009、GJB 150.9A-2009、GJB 150.3A-2009、GJB 150.8A-2009、GJB 150.12A-2009、GJB 150.14A-2009、GJB 150.22A-2009、GJB 150.24A-2009、GJB 150.25A-2009、IEC 60068-3-5、IEC 60068-3-5、IEC 60068-3-5、IEC 60068-3-5、IEC 60068-3-5、IEC 60068-5-2 1990、IEC 60068-2-1 2007、IEC 60068-2-2 2007、IEC 60068-2-78 2012、IEC 60068-2-1 2007、IEC 60068-2-14 2009、IEC 60068-2-30 2005、MIL-STD-810F 2000、MIL-STD-810F 2000、MIL-STD-810F 2000、GB/T 10586-1989、GB/T 10589-1989、GB/T 10590-1989、GB/T 11159-1989、GB/T 10591-1989、GB/T 10592-1989、GB/T 2422-1995、GB/T 2423.1-2001、GB/T 2423.2-2001、GB/T 2423.3-2006、GB/T 2424.6-2006、GB/T 5170.10-2008、GB/T2423.1-2001、GB/T2423.22-1987、GB/T2423.22-2002、GB/T2424.13-2002、GB/T2423.4-1993、GB/T 10263.1、GB/T 10263.10、GB/T 11606.1、GB/T 11606.17-1989、B/T 18102-2007、GJB 150.4A-1986、GJB 150.9A-1986、GJB 150.3A-1986、GJB 150.11A-1986、GJB 150.12A-1986、GJB 150.14A-1986、GJB 150.22A-1986、GJB 150.24A-1986、GJB 150.24A-1986、GJB 150.5A -2009、GJB 150.5A-1986、通用 ASTM G151、ASTM G154、 JISD 0205、SAE J2020、 涂料 ASTM D3794、ASTM D4587、FED-STD-1418、GM 9125P、JISK5600-7-8、ISO 11507、ISO 20340、M598-1990、NACE TM-01-84、NISSAN M0007、PrEN 927-6、 粘合剂 ·ASTMC1184、ASTM C1442、ASTM D904 、ASTM D5215、UNE 104-281-88、 塑料 ANSI C57.12.28 、ANSL.A14.5 、ASTM D4329·ASTMD4674、ASTM D5208 、ASTM D6662 、DIN 53384 、ISO4892-3、 JISK3750 、UNE 53.104、 屋面材料 ANSURMAPR-1-1990、 ASTM D4799 、ASTM D4811 、ASTM D3105、 ASTM D4434 、ASTM D5019、BS 903、Part A54 、CGSB-37.54-M 、DIN EN 534、 印刷油墨/美术材料 ·ASTM D3424 、ASTM F1945、 纺织品 AATCC TM 186、ACFFA Guideline

       ASTM-DIN 艾司坦丁仪器，代理销售：

       【德国Binder宾德】环境模拟箱MK 56、MK 115、MK 240、MK 400、MK 720、MK 1000、MKF 56、MKF 115、MKF 240、MKF 400、MKF 720、MKF 1000、MKT 115、MKT 240、MKT 400、MKT 720、MKT 1000、MKFT 115、MKFT 240、MKFT 400、MKFT 720、MKFT 1000；真空安全干燥箱烘箱E 28、ED 23、ED 400、ED 56、ED 115、ED 260、ED 720、FD 56、FD 115、FD 260、FD 720、FED 56、FED 115、FED 260、FED 720、FD 23、FED 400、FP 53、FP 115、FP 240、FP 400、FP 720、M 53、M 115、M 240、M 400、M 720、ED-S 56、ED-S 115、FD-S 56、FD-S 115、VD 23、VD 56、VD 115、VDL 23、VDL 56、VDL 115、FDL 115

       【美国Q-Lab】氙灯老化试验箱Q-SUN Xe-1、Q-SUN Xe-2、Q-SUN Xe-3；紫外老化试验箱QUV/se、QUV/spray、QUV/cw、QUV/uvc、QUV/basic；Q-FOG SSP、Q-FOG CCT、Q-FOG CRH

      【其他进口品牌：亚太拉斯Atlas、爱斯佩克ESPEC、伟思富奇Weiss Technik、Voetsch、美墨尔特Memmert、SUGA】